Manitowoc National Crane 500E2 Service Manual

INTRODUCTION 500E2 SERVICE MANUAL
1-2 Published 08/16/19 Control # 112-05
Whenever a question arises regarding your National Crane
product or this publication, please consult your National
Crane distributor for the latest information. Your National
Crane distributor is equipped with the proper tools,
necessary parts, and trained personnel to properly maintain
and service your equipment.
A Safety Compact Disc or a USB flash drive which includes
sections on Operation, Service and a Safety Video for
National Crane operators and owners is supplied when the
equipment is purchased new. Additional copies are available
from your local distributor.
New Owner
If you are the new owner of a National crane, please register
it with Manitowoc Crane Care so we have the ability to
contact you if the need arises.
Go to https://www.manitowoccranes.com/en/
Parts_Services/ServiceAndSupport/
ChangeOfOwnershipForm and complete the form.
Basic Nomenclature
The nomenclature used to describe parts of a National Crane
are described in the figure below. This nomenclature is used
throughout this manual.
GENERAL MAINTENANCE
The suggestions listed below are helpful in analyzing and
correcting problems:
• Determine the problem.
• List possible causes.
• Devise checks.
• Conduct checks in a logical order to determine the
cause.
• Consider the remaining service life of components
against the cost of parts and labor to replace them.
• Make the repair.
• Test the equipment to ensure the problem is fixed.
Item Component
1Winch
2 Boom
3 Sheaves
4 Boom Rest
5 Stabilizers
6 Hydraulic Reservoir
7 Control Console
8 Outriggers
Item Component
500E2 Series Major Components

Manitowoc National Crane 500E2 Specifications

General

Brand	Manitowoc
Model	National Crane 500E2
Category	Construction Equipment
Language	English