SET-UP AND INSTALLATION MLC650 VPC-MAX™ OPERATOR MANUAL
4-32
Published 04-06-18, Control # 231-14
See Figure 4-31 for the following procedure.
6. As the actuator reaches the minimum working position,
keep the rear of the beam just high enough for the limit
switch tripping brackets (1) to clear the top of the beam-
on-hook limit switches (2).
FIGURE 4-31
Item Description
1 Limit Switch Tripping Bracket (qty 2)
2 Beam-on-Hook Limit Switch (qty 2)
PAST Production
CURRENT Production
To Next Page
Loading...
