Mariner 70 - Reservoir Assembly Removal; Trim Motor Disassembly; Trim Motor Removal

6C-2390-13645--2 495 POWER-TRIM
Trim “Motor” Removal
1. Secure power trim assembly in soft jawed vise.
2. Remove screws securing end cap to reservoir
and remove end cap.
51486
a
a
a - Screws (4)
3. Remove motor from reservoir.
51484
Trim “Motor” Disassembly
1. Remove armature from motor frame. Note posi-
tion of washers on armature.
51486
a
b
c
c
a - Armature
b - Motor Frame
c - Washer (1 each end of armature)
Reservoir Assembly Removal
1. Remove manual release valve from manifold.
a
b
a - Manual Release Valve
b - Manifold
2. Remove “E” clip and O-rings from manual release
valve.
51196
a
c
b
a - “E” Clip
b - O-rings
c - Manual Release Valve