Matrix Sparsh VP110

Matrix SPARSH VP110 User Guide 113
To add a replace rule via web user interface:
• Click on Settings->Dial Plan->Replace Rule.
• Enter the string (e.g.,1) in the Prefix field.
• Enter the string (e.g., 1234) in the Replace field.
• Click Add to add the replace rule.
When you enter the number “1” using the keypad and then press the Send soft key, the phone will dial out
“1234” instead.
To edit a replace rule via web user interface:
• Click on Settings->Dial Plan->Replace Rule.
Local WebUserInterface
CreatethereplacerulefortheIP
phone.
Navigateto:
http://<phoneIPAddress>/
servlet?p=settings‐dialplan&q=load