Matrix Sparsh VP110 User Manual

122 Matrix SPARSH VP110 User Guide
Live dialpad is configurable via web user interface only.
Hotline
You can dial a hotline number immediately upon lifting the handset or pressing the Speakerphone key. You can also
configure a delay, where the phone will dial out the hotline number automatically after the specified period of time.
Procedure
Hotline can be configured using the configuration files or locally.
To configure hotline via web user interface:
• Click on Features->General Information.
• Enter the hotline number in the Hotline Number field.
ConfigurationFile <MAC>.cfg
Configurethehotlinenumber.
Specifythetime(inseconds)theIP
phonewaitsbefor eautomatically
dialingoutthehotlinenumber.
Formoreinformation,refer“Appendix
D‐ConfigurationParameters”.
Local
WebUserInt erface
Configurethehotlinenumber.
Specifythetime(inseconds)theIP
phonewaitsbefor eautomaticallydial
outthehotlinenumber.
Na
vigateto:http://<phoneIPAddress>/
servlet?p=features‐general&q=load
PhoneUserInterface
Configurethehotlinenumber.
Specifythetime(inseconds)theIP
phonewaitsbefor eautomatically
dialingoutthehotlinenumber.

Matrix Sparsh VP110 Specifications

General

Brand	Matrix
Model	Sparsh VP110
Category	IP Phone
Language	English