126 Matrix SPARSH VP110 User Guide
To configure SIP account and server redundancy features using the configuration files:
• Configure the following parameters in the <MAC>.cfg file as per the tables shown below:
Account Configuration and Registration
Local
WebUserInterface
Configuretheserverredundancyon
theIPphone.
Navigateto:
http://<phoneIPAddress>/
servlet?p=account‐
register&q=load&acc=0
PhoneUserInterface
ConfiguretheSIPaccountandrelated
parameters.
Parameter ValidValues Descriptions WebInterface Path
account.1.enable 0or1
Itenablesordisablestheaccount.
0‐Disabled
1‐Enabled
Thedefaultvalueis0.
Account‐>Register‐
>LineActive
account.1.register.en
able
0or1
EnablesorDisablestheaccountregistration.
0‐Disabled
1‐Enabled
Thedefaultvalueis1.
Account‐>Register‐
>Register
account.1.label
Stringwithin99
characters
ItconfiguresthelabeldisplayedontheLCD
sc
reenfortheaccount.
Thedefaultvalueisblank.
Account‐>Register‐
>Label
account.1.display_na
me
Stringwithin99
characters
Itconfiguresthedisplaynameforaccount.
Thedefaultvalueisblank.
Account‐>Register‐
>DisplayName
account.1.auth_name
Stringwithin99
characters
Itconfigurestheusernameforregister
authenticationfortheaccount.
Thedefaultvalueisblank.
Account‐>R
egister‐
>RegisterName
account.1.user_name
Stringwithin32
characters
Itconfigurestheregisterusernameforthe
account.
Thedefaultvalueisblank.
Account‐>Register‐
>UserName
account.1.password
Stringwithin99
characters
Itconfiguresthepasswordforregister
authenticationfortheaccount.
Thedefaultvalueisblank.
Account‐>Register‐
>Password
account.1.sip_server.
Y.address=
(Yrangesfrom1to2.)
IPadd
ressor
domainname
ItconfigurestheIPaddressordomainnameof
theSIPserverYfortheaccount.
Example:
account.1.sip_server.1.address=10.2.1.128
Thedefaultvalueisblank.
Account‐>Register‐
>SIPServerY‐>
ServerHost