Matrix Sparsh VP110 User Manual

Matrix SPARSH VP110 User Guide 127
DNS Resolution and Server Redundancy Configuration
Fallback Mode
account.1.sip_server.
Y.port
(Yrangesfrom1to2)
Integerfrom0
to65535
ItconfigurestheportofSIPserverYforthe
account.
Thedefaultvalueis5060.
Account‐>Register‐
>SIPServerY‐>Port
account.1.sip_server.
Y.expires
(Yrangesfrom1to2)
Integerfrom30
to2147483647
Itconfigurestheregistrationexpirationtime
(inseconds)toSIPse
rverYfortheaccount.
Thedefaultvalueis3600.
Account‐>Register‐
>SIPServerY‐>
ServerExpires
account.1.sip_server.
Y.retry_counts
(Yrangesfrom1to2)
Integerfrom0
to20
Itconfiguresthetimesforthephoneto
retransmittherequestwhentheSIPserverYis
unavailableorthereisnore
sponsefromthe
SIPserverYfortheaccount.
Thedefaultvalueis3.
Account‐>Register‐
>SIPServerY‐
>ServerRetryCounts
Parameter ValidValues Descriptions WebInterface Path
account.1.transport Integer
Itconfiguresthetransporttypeforthe
account.
0‐UDP
1‐TCP
2‐TLS
3‐DNS‐NAPTR
Thedefaultvalueis0.
Account‐>Register‐
>Transport
account.1.naptr_build 0or1
ItconfiguresthewayofSRVquerywhenthere
isnoresultfromtheNAPTRqueryforthe
account.
0‐SRVqueryusingUDPonly
1‐SRVqueryusingUDP,TCPorTLS.
Thedefaultvalueis0.
NA
Parameter ValidValues Descriptions WebInterface Path
account.1.fallback.red
undancy_type
0or1
Itconfigurestheregistrationmodeforthe
accountinfallbackmode.
0‐Concurrentregistration
1‐Successiveregistration
Thedefaultvalueis0.
NA
account.1.fallback.tim
eout
Integerfrom10
to2147483647
Itconfiguresthetimeinterval(inseconds)for
thephonetodetectwhethertheworking
serverisavailablebyse
ndingtheregistration
requestfortheaccount.
Itisonlyapplicabletosuccessiveregistration
mode.
Thedefaultvalueis120.
NA

Matrix Sparsh VP110 Specifications

General

Brand	Matrix
Model	Sparsh VP110
Category	IP Phone
Language	English