Matrix Sparsh VP110 User Manual

132 Matrix SPARSH VP110 User Guide
To configure Peer-to-Peer (P2P) calling feature via web user interface:
• Click on Features->General Information.
• Select Enable from the Allow IP Call list.
• Click Confirm to save the change.
• Then click on Account->Register.
• Select Enabled from the Line Active list.
• Select Disabled from the Register list.
• Configure the User Name. You may configure other parameters if required.
• Select the desired value from the Transport list.

Matrix Sparsh VP110 Specifications

General

Brand	Matrix
Model	Sparsh VP110
Category	IP Phone
Language	English