Matrix SPARSH VP110 User Guide 133
• Configure parameters of the SIP Server 1 in the corresponding fields.
• Click Confirm to save the change.
Making Peer-to-Peer (P2P) calls
• When you dial out any number (which is not an IP address) using the phone dial pad, the number will be
dialed out as per the SIP Server 1 address configured. This way outgoing call without registration may be
achieved.
• If you dial out an IP address using the phone dial pad, the IP address will be dialed out along with the
destination port as 5060 (irrespective of the Port Programmed for the SIP Server 1 parameter).
To Next Page
Loading...
