Matrix Sparsh VP110 User Manual

Matrix SPARSH VP110 User Guide 171
• Press the Dir soft key, and then select Remote Phone Book. Select the desired group and search for
the contact (Directory and remote phone book should be configured in advance. Refer “Directory” and
“Remote Phone Book” for more information.).
• Press OK or to dial out.
• Press or the Tran soft key to complete call transfer when receiving the ring-back.
To perform an attended transfer:
• Press or the Tran soft key during a call.
• Do one of the following:
• Enter the number you want to transfer the call to.
• Press the Dir soft key, and then select Local Directory. Select the desired group, and search for the
contact (Directory should be configured in advance. Refer “Directory” for more information.).
• Press the Dir soft key, and then select History. Select the desired list and use or to select the
entry (Directory should be configured in advance. Refer “Directory” for more information.).
• Press the Dir soft key, and then select Remote Phone Book. Select the desired group and search for
the contact (Directory and remote phone book should be configured in advance. Refer “Directory” and
“Remote Phone Book” for more information.).
• Press OK or to dial out.
• After the party answers the call, press or the Tran soft key to complete call transfer.
If you are using a handset, call transfer can be completed by hanging up the handset.
You can cancel call transfer before the call is connected by pressing the Cancel soft key.

Matrix Sparsh VP110 Specifications

General

Brand	Matrix
Model	Sparsh VP110
Category	IP Phone
Language	English