Matrix Sparsh VP110 - Page 274

266 Matrix SPARSH VP110 User Guide
Procedure
LLDP can be configured using the configuration files or locally.
TIAOrganizationally
SpecificTLVs
MediaCapabilities
TheMEDdevicetypeoftheIPphoneandthe
supportedLLDP‐MEDTLVtypecanbeencapsulatedin
LLDPDU.
ThesupportedLLDP‐MEDTLVtypesare:LLDP‐MED
Capabilitie s,NetworkPolicy,ExtendedPowerviaMDI‐
PDandInventory.
NetworkPolicy
PortVLANID,applicationtype,L2priorityandDS
CP
value.
ExtendedPower‐via‐MDI
Powertype,source,priorityandvalue.
Inventory–Hardware
Revision
HardwarerevisionoftheIPphone.
Inventory–Firmware
Revision
FirmwarerevisionoftheIPphone.
Inventory–Software
Revision
SoftwarerevisionoftheIPphone.
Inventory–SerialNumber SerialnumberoftheIPphone.
Inventory–Manufacturer
Name
Manuf
acturernameoftheIPphone.
Inventory–ModelName ModelnameoftheIPphone.
AssetID
AssertionidentifieroftheIPphone.
Thedefaultvalueis“asset”.
ConfigurationFile <MAC>.cfg
ConfigureLLDP.
Formoreinformation,refer
“AppendixD‐Configuration
Parameters”.