Matrix Sparsh VP110 User Manual

Matrix SPARSH VP110 User Guide 269
To configure VLAN for Internet port via web user interface:
• Click on Network->Advanced.
• In the VLAN block, select the desired value from the WAN Port Active list.
• Enter the VLAN ID in the VID (1-4094) field.
• Select the desired value (0-7) from the Priority list.
• Click Confirm to save the change.
A dialog box pops up to prompt that the settings will take effect after a reboot.
• Click OK to reboot the IP phone.
To configure VLAN for PC port via web user interface:
• Click on Network->Advanced.
• In the VLAN block, select the desired value from the PC Port Active list.
• Enter the VLAN ID in the VID (1-4094) field.
• Select the desired value (0-7) from the Priority list.
• Click Confirm to save the change.
A dialog box pops up to prompt that the settings will take effect after a reboot.

Matrix Sparsh VP110 Specifications

General

Brand	Matrix
Model	Sparsh VP110
Category	IP Phone
Language	English