Matrix Sparsh VP110 User Manual

Matrix SPARSH VP110 User Guide 359
PPPoE
Parameter-
network.secondary_dns
ConfigurationFile
<MAC>.cfg
Description
ConfiguresthesecondaryDNSserverwhentheInternet
porttypeisconfiguredasStaticIPAddressandtheIP
addressmodeisconfiguredasIPv4orIPv4&IPv6.
Note
:Ifyouchangethispar ameter,theIPphonewill
reboottomakethechangetakeeffect.
Format IPv4Address
DefaultValue Blank
Range NotApplicable
Example
network.secondary_dns=202.101.103.54
Parameter-
network.internet_port.type
ConfigurationFile
<MAC>.cfg
Description
ConfigurestheInternetporttype.
Note
:Ifyouchangethispar ameter,theIPphonewill
reboottomakethechangetakeeffect.
Format Integer
DefaultValue
0
Range
Validvaluesare:
0‐DHCP
1‐PPPoE
2‐StaticIPAddress
Example
network.internet_port.type=1
Parameter-
network.pppoe.user
ConfigurationFile
<MAC>.cfg
Description
ConfiguresthePPPoEusernamewhentheInternetport
typeisconfiguredasPPPoEandtheIPaddressmodeis
configuredasIPv4orIPv4&IPv6.
Note
:Ifyouchangethispar ameter,theIPphonewill
reboottomakethechangetakeeffect.
Format String
DefaultValue Blank
Range Stringwithin32characters
Example
network.pppoe.user=test.matrix

Matrix Sparsh VP110 Specifications

General

Brand	Matrix
Model	Sparsh VP110
Category	IP Phone
Language	English