Matrix Sparsh VP110

Matrix SPARSH VP110 User Guide 367
Web Server Type
Parameter-
wui.http_enable
ConfigurationFile
<MAC>.cfg
Description
EnablesordisablestheIPphonetoaccessitsweb
userinterfaceusingHTTPprotocol.
Note
:Ifyouchangethispar ameter,theIPphonewill
reboottomakethechangetakeeffect.
Format Boolean
DefaultValue 1
Range
Validvaluesare:
0‐Disabled
1‐Enabled
Example
wui.http_enable=1
Parameter-
network.port.http
ConfigurationFile
<MAC>.cfg
Description
ConfigurestheHTTPportuse dtoaccessthewebuser
interfaceoftheIPphone.
ThedefaultHTTPportis80.
Note
:Ifyouchangethispar ameter,theIPphonewill
reboottomakethechangetakeeffect.
Format Integer
DefaultValue 80
Range 1to65535
Example
network.port.http=80
Parameter-
wui.https_enable
ConfigurationFile
<MAC>.cfg
Description
EnablesordisablestheIPphonetoaccessitsweb
userinterfaceusingHTTPSprotocol.
Note
:Ifyouchangethispar ameter,theIPphonewill
reboottomakethechangetakeeffect.
Format Boolean
DefaultValue 1