Matrix Sparsh VP110

388 Matrix SPARSH VP110 User Guide
Auto Answer
Example auto_redial.enable=1
Parameter-
auto_redial.interval
ConfigurationFile
<MAC>.cfg
Description
Configurestheinterval(inseconds)fortheIPphoneto
waitbetweenredials.
TheIPphoneredialsthedialednumberatregular
intervalstillthecalleeanswersthecall.
Format Integer
DefaultValue 10
Range 1to300
Example
auto_redial.interval=10
Parameter-
auto_redial.times
ConfigurationFile
<MAC>.cfg
Description
ConfigurestheredialtimesfortheIPphone.
TheIPphonetriestoredialthedialednumber asmany
timesasconfiguredtillthecalleeanswersthecall.
Format Integer
DefaultValue 10
Range 1to300
Example auto_redial.times=10
Parameter‐
account.X.aut o_answer
ConfigurationFile
<MAC>.cfg
Description
EnablesordisablesautoanswerfeatureforaccountX.
Ifitissetto1(Enabled),theIPphonecanautomatically
answeranincomingcall.
Xis1.
Note
:TheIPphonecannotautomaticallyanswerthe
incomingcallduringacallevenifautoansweris
enabled.