Matrix Sparsh VP110

Matrix SPARSH VP110 User Guide 387
Auto Redial
Format Boolean
DefaultValue 1
Range
Validvaluesare:
0‐Disabled
1‐Enabled
Example
call_waiting.tone=1
Parameter-
call_waiting.on_code
ConfigurationFile
<MAC>.cfg
Description
Configuresthecallwaitingoncodetoactivatethe
server‐sidecallwaitingfeature.
Format String
DefaultValue Blank
Range Stringwithin32characters
Example
call_waiting.on_code=*72
Parameter-
call_waiting.off_code
ConfigurationFile
<MAC>.cfg
Description
Configuresthecallwaitingoffcodetodeactivatethe
server‐sidecallwaitingfeature.
Format String
DefaultValue Blank
Range Stringwithin32characters
Example call_waiting.off_code=*73
Parameter-
auto_redial.enable
ConfigurationFile
<MAC>.cfg
Description
EnablesordisablestheIPphonetoautomaticallyredial
thecallednumberwhenitisbusy.
Ifitissetto1(Enabled),theIPphonewilldialthe
previousdialedoutnumberautomaticallywhenthe
dialednumberisbusy.
Format Boolean
DefaultValue
0
Range
Validvaluesare:
0‐Disabled
1‐Enabled