Matrix Sparsh VP110

396 Matrix SPARSH VP110 User Guide
Use Outbound Proxy in Dialog
SIP Session Timer
Parameter-
sip.use_out_bound_in_dialog
ConfigurationFile
<MAC>.cfg
Description
EnablesordisablestheIPphonetosendtheSIP
requeststotheoutboundproxyser ver.
Ifitissetto1(Enabled),alltheSIPrequestmessages
fromtheIPphonewillbeforcedtosendtothe
outboundproxyserver.
Note
:Ifyouchangethisparameter,theIPphonewill
reboottomakethechangetakeeffect.
Format Boolean
DefaultValue 1
Range
Validvaluesare:
0‐Disabled
1‐Enabled
Example sip.use_out_bound_in_dialog=1
Parameter‐
account.X.advanced.timer_t1
ConfigurationFile
<MAC>.cfg
Description
ConfigurestheSIPsessiontimerT1(inseconds)for
accountX.
T1isanestimateoftheRoundTripTime(RTT)of
transactionsbetweenaSIPclientandSIPserver.
Xis1.
Format Float
DefaultValue 0.5
Range 0.5to10
Example
account.1.advanced.timer_t1=0.5
Parameter‐
account.X.advanced.timer_t2
ConfigurationFile
<MAC>.cfg
Description
ConfiguresthesessiontimerT2(inseconds)for
accountX.
T2representsthemaximumretransmitintervalfor
non‐INVITErequestsandINVITEresponses.
Xis1.
Format Float
DefaultValue 4