Matrix Sparsh VP110

Matrix SPARSH VP110 User Guide 397
Session Timer
Range 2to40
Example
account.1.advanced.timer_t2=4
Parameter‐
account.X.advanced.timer_t4
ConfigurationFile
<MAC>.cfg
Description
ConfiguresthesessiontimerofT4(inseconds)for
accountX.
T4representsthemaximumdurationamessagewill
remaininthenetwork.
Xis1.
Format Float
DefaultValue 5
Range 2.5to60
Example
account.1.advanced.timer_t4=5
Parameter‐
account.X.session_timer.enable
ConfigurationFile
<MAC>.cfg
Description
EnablesordisablesthesessiontimerforaccountX.
Ifitissetto1(Enabled),IPphonewillsendperiodic
re‐INVITErequeststorefreshthesessionduringacall.
Xis1.
Format Boolean
DefaultValue 0
Range
Validvaluesare:
0‐Disabled
1‐Enabled
Example
account.1.session_timer.enable=1
Parameter‐
account.X.session_timer.expires
ConfigurationFile
<MAC>.cfg
Description
ConfigurestheIPphonetorefreshthesessionduring
acallatregularintervals(inseconds)foraccountX.
Ifitissetto1800(1800s),theIPphonewillrefr esh
thesessionduringacallbefore1800seconds.
Xis1.
Format Integer
DefaultValue 1800
Range 30to7200