Matrix Sparsh VP110

398 Matrix SPARSH VP110 User Guide
Call Hold
Example
account.1.session_timer.expires=1800
Parameter‐
account.X.session_timer.refresher
ConfigurationFile
<MAC>.cfg
Description
Configuresthesessiontimerrefr esherforaccountX.
Ifitissetto0(UAC),refreshingthesessionis
performedbytheIPphone.
Ifitissetto1(UAS),refreshingthesessionis
performedbyaSIPserver.
Xis1.
Format Integer
DefaultValue 0
Range
Validvaluesare:
0‐UAC
1‐UAS
Example account.1.session_timer.refresher=0
Parameter-
features.play_hold_tone.enable
ConfigurationFile
<MAC>.cfg
Description
EnablesordisablestheIPphonetoplayatonewhen
thereisaholdcallontheIPphone.
Format Boolean
DefaultValue 1
Range
Validvaluesare:
0‐Disabled
1‐Enabled
Example
fe atures.play_hold_tone.enable=1
Parameter-
fe atures.play_hold_tone.delay
ConfigurationFile
<MAC>.cfg
Description
Configurestheinterval(inseconds)atwhichtheIP
phoneplaysaholdtone.
Ifitissetto30(30s),theIPphonewillplayahold
toneevery30secondswhenthereisaholdcallon
theIPphone.
Note
:Itworksonlyiftheparameter
“features.play_hold_tone.enable”issetto1
(Enabled).