Matrix Sparsh VP110

418 Matrix SPARSH VP110 User Guide
Remote Phone Book
Parameter-
voice.tone.dial
voice.tone.ring
voice.tone.busy
voice.tone.congestion
voice.tone.callwaiting
voice.tone.dialrecall
voice.tone.info
voice.tone.stutter
voice.tone.message
voice.tone.autoanswer
ConfigurationFile
<MAC>.cfg
Description
Configuresthetoneforeachcondition.
tonelist=element[,element][,element]…
Where
element=[!]Freq1[+Freq2][+Freq3][+Freq4]/
Duration
Freq:thefrequencyofthetone(rangesfrom200to
7000Hz).Ifitissetto0(0Hz),itmeansthetoneis
notplayed.Atoneiscomprisedofatmostfour
d
ifferentfrequencies.
Duration:thetimeduration(inmilliseconds,ranges
from0to30000ms)oftheringtone.
Youcanconfigureatmosteightdifferenttonesfor
onecondition,andseparatetonesbycommas(e.g.,
250/200,!0/1000,200+300/500,600+700+800+1000/
2000).Theexclamationpoint(!)canbeadded
optionally,whichmeansthesetonesareonlypl
ayed
once.
Note
:Itworksonlyiftheparameter
“voice.tone.country”issettoCustom.
Format Refertotheintroductionabove
DefaultValue Blank
Range NotApplicable
Example
voice.tone.dial=800+200/1000,0/100,500/1200,
500+600+950+1500/5000
Parameter-
remote_phonebook.data.X.url
ConfigurationFile
<MAC>.cf g
Description
ConfigurestheaccessURLoftheremoteXML
phonebook.
Xrangesfrom1to5.
Format URL
DefaultValue Blank
Range Stringwithin511characters