Matrix Sparsh VP110 User Manual

Matrix SPARSH VP110 User Guide 471
IPv4&IPv6.Default 64.Range 0 to 128
#network.ipv6_Secondary_dns =2026:1234:1:1:c3c7:c11c:5447:23a6
#### Port_Link #############
#Configures the transmission method of Internet port.0-Auto
negotiate(Default),1-Full duplex, 10Mbps,2-Full duplex, 100Mbps,3-Half duplex,
10Mbps,4-Half duplex, 100Mbps
#We recommend that you do not change this parameter.
network.internet_port.speed_duplex = 0
#Configures the transmission method of PC port.0-Auto negotiate(Default),1-Full
duplex, 10Mbps,2-Full duplex, 100Mbps,3-Half duplex, 10Mbps,4-Half duplex,
100Mbps
#We recommend that you do not change this parameter.
network.pc_port.speed_duplex = 0
#Enables or disables the PC port.0-Disabled,1-Auto Negotiation(Default)
network.PC_port.enable = 1
#### LLDP ####
#Enables or disables LLDP feature on the IP phone.0-Disabled,1-Enabled(Default).
network.lldp.enable = 1
#Configures the amount of time (in seconds) between the transmissions of LLDP
packet.Range from 1 to 3600.Default 60.
network.lldp.packet_interval = 80
#### VLAN ###########
#Enables or disables the IP phone to insert VLAN tag on packet from the Internet
port.
network.vlan.internet_port_enable = 0
#Configures the VLAN ID that is associated with the particular VLAN.Range 1 to
4094.
network.vlan.internet_port_vid = 15

Matrix Sparsh VP110 Specifications

General

Brand	Matrix
Model	Sparsh VP110
Category	IP Phone
Language	English