Matrix Sparsh VP110 User Manual

474 Matrix SPARSH VP110 User Guide
#configures the access URL of the CA certificate when the 802.1x mode is
configured as EAP-TLS,PEAP-MSCHAPV2 or EAP-TTLS/EAP-MSCHAPV2.The default value
is blank.URL within 511 characters.
network.802_1x.root_cert_url =http://192.168.1.10/ca.pem
#configures the access URL of the device certificate when the 802.1x mode is
configured as EAP-TLS.The default value is blank.URL within 511 characters.
network.802_1x.client_cert_url =http://192.168.1.10/ client.pem
### span to pc(Port Mirroring)#######
#enables or disables the phone to span data packets received in the WAN port to
the PC port. If it is enabled, all packets from WAN port can be received by PC
port.0-Disabled(Default).1-Enabled.
network.span_to_pc_port =1
#### Reg_Surge_Prev######
#configures the maximum duration (in seconds) for account register after
startup.The default value is 0.Integer from 0 to 60.
sip.reg_surge_prevention =20
################################################################################
#######
## SIP Account Settings ##
################################################################################
#######
### Basic Account Settings#####
#Enables or disables the account.The.0-Disabled(Default),1-Enabled
account.1.enable =1
#Enable the Account registration to the Programmed server.0-Disabled,1-
Enabled(Default).
account.1.register.enable=0
#configures the label displayed on the LCD screen for account.The default value
is blank.String within 99 characters.
account.1.label =Ranger
#configures the display name for account.The default value is blank.String within

Matrix Sparsh VP110 Specifications

General

Brand	Matrix
Model	Sparsh VP110
Category	IP Phone
Language	English