Matrix Sparsh VP110 - Page 483

Matrix SPARSH VP110 User Guide 475
99 characters.
account.1.display_name =Awsome
#configures the user name for register authentication for account.The default
value is blank.String within 99 characters.
account.1.auth_name =3301
#configures the register user name for account.The default value is blank.String
within 32 characters.
account.1.user_name =3301
#configures the password for register authentication for account.The default
value is blank.String within 99 characters.
account.1.password =12345
#Enables the Outbound Proxy for the Account.0-Disabled(Default),1-Enabled
account.1.outbound_proxy_enable =1
#Configures the Outbound server address.
account.1.outbound_host =voipmaster.matrix.com
#Configures the Outbound server address.Range 0 to 65535.Default 5060.
account.1.outbound_port =5060
#configures the local SIP port for account.The default value is 5060.Range from
1024 to 65535
account.1.sip_listen_port =8060
#configures the transport type for account.0-UDP,1-TCP,2-TLS,3-DNS-NAPTR, The
default value is 0.
account.1.transport =0
#Configures UDP SRV query or TCP/TLS SRV query for the IP phone to be performed
when no result is returned from NAPTR query.0-UDP(Default),1-TCP or TLS.
account.1.naptr_build =0
#enables or disables the NAT traversal for account.0-Disabled(Default),1-
Enabled.
account.1.nat.nat_traversal=1
#configures the IP address or domain name of the STUN server for account.Default
Blank.String within 99 characters
account.1.nat.stun_server =stun.voipbuster.com
#configures the port of the STUN server for account.The default value is
3478.Range 1024 to 65000
account.1.nat.stun_port = 3478