476 Matrix SPARSH VP110 User Guide
### Failback(Server Redundancy)#####
#Configures the registration mode for the IP phone in fallback mode.0-Concurrent
registration(Default),1-Successive registration.
account.1.fallback.redundancy_type =0
#Configures the time interval (in seconds) for the IP phone to detect whether the
working server is available by sending the registration request after the
fallback server takes over call control.
#It is only applicable to successive registration mode.Range 10 to 2147483647
Default:120
account.1.fallback.timeout =120
#Configures the IP address or domain name of the SIP server 1 for account.Default
Blank.String within 256 characters
account.1.sip_server.1.address =matrix.pbx.com
#Configures the port of the SIP server 1 for account.0 to 65535.Default 5060.
account.1.sip_server.1.port =5060
#Configures the registration expires (in seconds) of the SIP server 1 for
account.Default 3600.Range 30 to 2147483647.
account.1.sip_server.1.expires =2500
#Configures the retry times for the IP phone to resend requests when the SIP
server 1 does not respond correctly for account.Range 0 to 20.Default 3.
account.1.sip_server.1.retry_counts =4
#configures the mode for the phone to retry the primary server in failover mode
for account.
#0-newRequests: all requests are forwarded to the primary server
first,regardless of the last used server.1-DNSTTL: the phone retries to use the
primary server after the timeout of the DNSTTL configured for the SIP server.
#2-Registration: the phone retries to use the primary server when the SIP
server’s registration requires renewal.
#3-duration: the phone retries to use the primary server after the timeout
defined by the parameter “account.1.failback_timeout”.
#The default value is 0.
account.1.sip_server.1.failback_mode =0
#configures the timeout (in seconds) for the phone to retry to use the primary
server after failing over to the current working server for account when the
To Next Page
Loading...
Need help?
General
