Matrix Sparsh VP110 User Manual

Matrix SPARSH VP110 User Guide 479
account.1.codec.7.priority = 5
account.1.codec.8.priority = 5
account.1.codec.6.priority = 7
################################################################################
#######
## SIP Account Advanced Settings ##
################################################################################
#######
#configures the type of keep-alive packets sent by the phone to the NAT device to
keep the communication port open so that NAT can continue to function for account
#0-Dsiabled,1-Default: the phone sends UDP packets to the server,2-Option: the
phone sends SIP OPTION packets to the server,3-Notify: the phone sends SIP NOTIFY
packets to the server.
account.1.nat.udp_update_enable =0
#configures the keep-alive interval (in seconds) for account.The default value is
30.Range is 15 to 2147483647
account.1.nat.udp_update_time =60
#enables or disables NAT Rport feature for account.0-Disabled(Default),1-
Enabled.
account.1.nat.rport =1
#configures the session timer T1 (in seconds) for account.The default value is
0.5.Float from 0.5-10s.
account.1.advanced.timer_t1 =0.5
#configures the session timer T2 (in seconds) for account.The default value is
4.Float from 2-40s.
account.1.advanced.timer_t2 =4
#configures the session timer T4 (in seconds) for account.The default value is
5.Float from 2.5-60s.
account.1.advanced.timer_t2 =5
#configures the DTMF type for account.0-INBAND,1-RFC2833(Default),2-SIP INFO,3-
AUTO or SIP INFO.
account.1.dtmf.type =1
#configures the RFC2833 payload for account.The default value is 101.From 96 to
127.
account.1.dtmf.dtmf_payload =101

Matrix Sparsh VP110 Specifications

General

Brand	Matrix
Model	Sparsh VP110
Category	IP Phone
Language	English