Matrix Sparsh VP110 User Manual

480 Matrix SPARSH VP110 User Guide
#configures the DTMF info type when the DTMF type is configured as “SIPINFO”,
“AUTO or SIP INFO” for account.
#0-Disabled(Default),1-DTMF-Relay,2-DTMF,3-Telephone-Event.
account.1.dtmf.info_type =0
#Enables the PRACK for the account.enables or disables 100 reliable
retransmission feature for account.0-Disabled(Default),1-Enabled.
account.1.100rel_enable =0
#enables or disables the phone to subscribe the message waiting indicator for
account.0-Disabled(Default),1-Enabled.
account.1.subscribe_mwi =1
#configures the interval (in seconds) of MWI subscription for account.The default
value is 3600.Range 0 to 84600.
account.1.subscribe_mwi_expires =3600
#enables or disables the phone to subscribe to the voice mail number for the
message waiting indicator for account.
#This method is not supported by Matrix PBX.Here the SUBSCRIBE for VM sent to
Voice mail retrieval number.0-Disabled(Default),1-Enabled.
account.1.subscribe_mwi_to_vm =0
#configures the voice mail number for account.(Voice Mail Retrieval Number).The
default value is blank.String within 99 characters.
voice_mail.number.1=3931
#configures the source caller identity for presentation when receiving an
incoming call for account.
#0-FROM(Default),1-PAI,2-PAI-FROM,3-PRID-PAI-FROM,4-PAI-RPID-FROM,5-RPID-FROM
account.1.cid_source =1
#enables or disables the session timer for account.0-Disabled(Default),1-
Enabled.
account.1.session_timer.enable =0
#configures the interval (in seconds) for refreshing the SIP session for
account.The default value is 1800.Range The default value is 1800.
account.1.session_timer.expires =1800
#configures the refresher of the session timer for account.0-UAC(Default),1-UAS.
account.1.session_timer.refresher =0
#enables or disables the "user=phone" carried in the INVITE message for
account.0-Disabled(Default),1-Enabled.
account.1.enable_user_equal_phone =1

Matrix Sparsh VP110 Specifications

General

Brand	Matrix
Model	Sparsh VP110
Category	IP Phone
Language	English