Matrix Sparsh VP110 - Page 493

Matrix SPARSH VP110 User Guide 485
LCD screen before displaying the caller ID when performing a semi-attended
transfer.0-Disabled , 1-Enabled(default).
transfer.semi_attend_tran_enable =1
#enables or disables the phone to complete the blind transfer through on-hook.0-
Disabled , 1-Enabled(default).
transfer.blind_tran_on_hook_enable =1
#enables or disables the phone to complete the attended transfer through on-
hook.0-Disabled , 1-Enabled(default).
transfer.on_hook_trans_enable =1
#enables or disables the phone to transfer call to the two parties after a local
conference call hangs up.0-Disabled(default), 1-Enabled.
transfer.tran_others_after_conf_enable =0
################################################################################
#######
## Call Pickup ##
################################################################################
#######
#enables or disables the phone to display the DPickup soft key when the phone is
in the pre-dialing screen.0-Disabled(default), 1-Enabled.
features.pickup.direct_pickup_enable =0
#configures the directed call pickup code.The default value is blank.String
within 32 characters.
features.pickup.direct_pickup_code =12
#enables or disables the phone to display the GPickup soft key when the phone is
in the pre-dialing screen.0-Disabled(default), 1-Enabled.
features.pickup.group_pickup_enable =0
#configures the group call pickup code.The default value is blank.String within
32 characters.
features.pickup.group_pickup_code =*4
################################################################################
#######
## Remote Control ##
################################################################################
#######