Matrix Sparsh VP110 - Page 494

486 Matrix SPARSH VP110 User Guide
#configures the IP address of the push XML server.The default value is blank.IP
address.
push_xml.server =192.168.153.16
#enables or disables the phone to use the push XML via SIP NOTIFY message.0-
Disabled(default), 1-Enabled.
push_xml.sip_notify =0
#enables or disables the phone to block displaying the push XML screen when in
calling status.0-Disabled(default), 1-Enabled.
push_xml.block_in_calling =0
#configures the IP address of server from which the phone receives the action URI
requests.
#Multiple IP addresses are separated by commas.
#If it is set to any, the phone will receive action URI requests from any
server.If it is left blank, the phone will not receive action URI requests.
#The default value is blank.Valid is IP address or any.
features.action_uri_limit_ip=any
################################################################################
#######
## Phone Lock ##
################################################################################
#######
#configures the keypad lock type.0-Disabled(Default),1-Menu Key,2-Function
Keys,3-All Keys.
phone_setting.lock =0
#configures the password for unlocking the keypad.The default value is
123.characters within 15 digits.
phone_setting.phone_lock.unlock_pin =123
#configures the interval (in seconds) to automatically lock the keypad.
#The default value is 0 (the keypad is locked only by long pressing the pound key
or pressing the keypad lockkey).Integer from 0 to 3600.
phone_setting.phone_lock.lock_time_out =0
#configures emergency numbers.Multiple emergency numbers are separated by
commas.The default value is 112,911,110.String within 99 characters
phone_setting.emergency.number =100,101,102,108