Matrix Sparsh VP110

48 Matrix SPARSH VP110 User Guide
• Secondary DNS
Procedure
Network parameters can be configured manually using the configuration files or locally.
To configure the IP address mode via web user interface:
• Click on Network->Basic.
• Select desired value from the Mode (IPv4/IPv6) list.
• Click Confirm to save the change.
A dialog box pops up to prompt that settings will take effect after a reboot.
• Click OK to reboot the IP phone.
ConfigurationFile <MAC>.cfg
ConfigurenetworkparametersoftheIP
phonemanually.
Formoreinformation,refer“Appendix
D‐ConfigurationParameters”.
Local
WebUserInterface
ConfigurenetworkparametersoftheIP
phonemanually.
Navigateto:
http://<phoneIPAddress>/
servlet?p=network&q=load
PhoneUserInterface
ConfigurenetworkparametersoftheIP
phonemanually.