MAXDATA PLATINUM Server Board User’s Manual
33
Processors
WARNING
If the server has been running, any installed processor and heat sink on the processor
board(s) will be hot. To avoid the possibility of a burn, be careful when removing or
installing server board components that are located near processors.
CAUTIONS
Processor must be appropriate: You may damage the server if you install a processor that
is inappropriate for your server. Make sure your server can handle a newer, faster processor
(thermal and power considerations). For exact information about processor interchangeabil-
ity, contact your customer service representative or visit the Intel Customer Support website:
http://support.intel.com/support/motherboards/server/scb2
ESD and handling processors: Reduce the risk of electrostatic discharge (ESD) damage to
the processor by doing the following: (1) Touch the metal chassis before touching the
processor or server board. Keep part of your body in contact with the metal chassis to
dissipate the static charge while handling the processor. (2) Avoid moving around
unnecessarily.
To Next Page
Loading...
