MAXDATA PLATINUM Server Board User’s Manual
85
Problems with Application Software
If you have problems with application software, do the following:
q Verify that the software is properly configured for the system. See the software installation
and operation documentation for instructions on setting up and using the software.
q Try a different copy of the software to see if the problem is with the copy you are using.
q Make sure all cables are installed correctly.
q Verify that the server board jumpers are set correctly. See Chapter 5.
q If other software runs correctly on the system, contact your vendor about the failing
software.
If the problem persists, contact the software vendor’s customer service representative for
help.
Bootable CD-ROM Is Not Detected
Check the following:
q Is the BIOS set to allow the CD-ROM to be the first bootable device?
q Check cable connections.
q Verify CD is bootable in another known good CD-ROM drive. (Especially if the CD is a copy.)