MAXDATA PLATINUM - Advanced Menu

MAXDATA PLATINUM Server Board User’s Manual
44
Processor Settings Submenu
Feature Choices Description
Processor Type N/A Reports type of processor(s) installed in system.
Processor POST Speed N/A Reports the speed of the processor measured at POST.
Processor Retest Disabled
Enabled Select yes for the BIOS to clear historical processor status
and retest all processors on the next boot.
Processor Serial Number Enabled
Disabled If enabled, the system records the serial number of each
processor.
Processor 1 CPU ID N/A Reports Stepping for Processor 1.
Processor 1 L2 Cache Size N/A Reports L2 Cache Size for Processor 1. This feature does
not appear if processor 1 is absent or disabled.
Processor 2 CPU ID N/A Reports Stepping for Processor 2.
Processor 2 L2 Cache Size N/A Reports L2 Cache Size for Processor 2. This feature does
not appear if processor 2 is absent or disabled.
Advanced Menu
Feature Choices Description
PCI Configuration Press <Enter> Enters submenu.
Peripheral Configuration Press <Enter> Enters Submenu
Memory Configuration Press <Enter> Enters Submenu
Advanced Chipset Control Press <Enter> Enters submenu
Reset Configuration Data No
Yes Select Yes to clear the system configuration data during
next boot. System automatically resets to No in next boot.
Plug & Play O/S No
Yes Selecting “No” lets the BIOS configure all the devices in
the system. Selecting “Yes” allows the OS configure Plug
and Play devices.
NumLock Off
On Enables or disables the “Numlock” function at power up.