MAXDATA PLATINUM - Security Menu

MAXDATA PLATINUM Server Board User’s Manual
47
Advanced Chipset Control Submenu
Feature Option Description
Wake on Ring Disabled Legacy wake only: Determines the action of the system
Enabled when the system power is off and the modem is ringing.
Wake on LAN Disabled Legacy wake only: Determines the action of the system
Enabled when a LAN wake up event occurs.
Wake on PME Disabled Legacy wake only: Determines the action of the system when
Enabled a PCI Power Management Enable wake up event occurs.
Wake on RTC Alarm Disabled Legacy wake only: Determines the action of the system when
Enabled a RTC Alarm Wake up event occurs.
Security Menu
Enabling the Supervisor Password field requires a password for entering BIOS Setup. The
passwords are not case sensitive.
Feature Choices Description
User Password is Installed Informational Only.
Not Installed
Administrator Password is Installed
Not Installed Informational Only.
Set Administrative Password Press <Enter> When the <Enter> key is pressed, a pass
word prompt appears. Press ESC key to
abort. Once set, this can be disabled by set
ting it to a null string or by clearing password
jumper on server board.
Set User Password Press <Enter> When the <Enter> key is pressed, a pass
word prompt appears. Press ESC key to
abort. Once set, this can be disabled by set
ting it to a null string or by clearing password
jumper on server board.
User Access Level Limited Sets the User access level for various BIOS
No Access setup functions.
View Only
Full
Password on Boot Disabled If your password is set and enabled, the
Enabled system prompts you for a password before it
boots.
Secure Mode Timer 1 minute Period of PS/2 keyboard and/or mouse
2 minutes inactivity specified for secure mode to
5 minutes activate. A password is required for secure
10 minutes mode to function.
20 minutes This option only appears on the screen after
60 minutes a “user” password has been entered.
120 minutes
Secure Mode Hot Key (CTRL-ALT- ) Z Key assigned to invoke secure mode fea
tures cannot be enabled unless at least one
password is set. This option only appears on
the screen after a “user” password has been
entered.
Secure Mode Boot Disabled System boots in secure mode.
Enabled The user must enter a password to unlock
the system. This option only appears on the
screen after a “user” password has been
entered.
continued