MAXDATA PLATINUM - SEL Manager Add-In

MAXDATA PLATINUM Server Board User’s Manual
59
To Change or Clear the User Password
1. Click on the User password button.
2. Enter the old password in the first field.
3. Enter the new password in the second field (or leave blank to clear).
4. Confirm the password by entering it again in the second field (or leave blank to clear).
Options Button
The ‘Options’ button allows the user to set or change any of the various security options
available on the system platform. The window created by the ‘Options’ button includes ‘Save’,
‘Close’, and ‘Help’ buttons.
Under this window, you can set the other security options:
• Hot Key – Set a key sequence that, when pressed, will drop the server into secure mode.
• Lockout Timer – Set an interval that, if no activity takes place, it will drop the server into
secure mode.
• Secure Boot Mode – Force the server to boot directly into secure mode.
• Video Blanking – Turn off the video when the server is in secure mode.
• Floppy Write – Control access to the diskette drive while the server is in secure mode.
• Reset/Power Switch Locking – Control the power and reset buttons while the server is in
secure mode.
Close Button
The ‘Close’ button exits the PWA and returns the user to the SSU.
Help Button
The ‘Help’ button invokes the SSU help subsystem.
SEL Manager Add-in
The SEL Manager provides support for the user to perform the following:
• Examine all system event log entries, stored in the non-volatile storage area of the server.
• Examine system event log entries from a previously stored file.
• Save the system event log entries to a file.
• Clear the system event log entries from the non-volatile storage area.
The SEL Manager has the following menus:
File
The File menu has the following options:
• Open: View data from a previously saved SEL file.
• Save As: Save the currently loaded SEL data to a file.
• Exit: Quits the SEL Viewer.