Next touch the SET AS
PRIMARY icon, an asterix (*) will
appear at the beginning of the
device name to show that this is
set as the primary device.
When a device is connected to
IRIS via Bluetooth®, the device
name will be highlighted in
orange.
NOTE: If no phone is
currently connected, and
two or more paired phones are
detected, IRIS will connect the
one that is Set as Primary.
If you no longer wish the phone
to be Primary, touch the icon
again.
Sync Contacts
Touch the icon to manually
synchronize Contacts and Call
History. The icon at the top of
the screen is visible while
synchronization is in progress.
If contact details are changed in
the phone, while it is connected,
you will need to manually
synchronize again.
Each time your phone
reconnects via Bluetooth®, you
will be asked to confirm that you
wish to update your contacts and
call history from the phone. If this
is not completed, the latest
contacts and call history
changes on your phone will not
be visible on IRIS. To avoid
having to confirm the
synchronization on your phone
every time you enter the vehicle,
set your phone to allow IRIS to
automatically share contacts and
call history.
Connect or Disconnect
Only one phone can be
connected at any one time.
To disconnect that phone from
the system, locate the phone in
the list of paired devices and
touch the entry.
Then touch DISCONNECT. The
phone will be disconnected from
the system, and the icon name
will change to CONNECT.
The phone will remain paired for
re-connection in the future.
To re-connect the phone, touch
the CONNECT icon.
If you attempt to connect a
phone while another one is
already connected, the MCC will
IRIS.book Page 12 Thursday, October 18, 2012 8:21 AM
To Next Page
Loading...