Volume control
Rotate the control (2) clockwise
to increase volume or counter
clockwise to reduce the volume.
A number representing the
volume setting will appear briefly
on the screen
The volume control is used to set
the volume of the system that is
currently active. The description
of the active system will appear
on the screen. For additional
information on setting a volume
level, see Volume Level, page
14.
Rotate the volume control in
either direction to restore the
sound after muting.
NOTE: You can adjust any
volume source by rotating
the volume control dial. For
temporary sources of audio
(phone calls), this can be
adjusted using the dial when the
source is active, or via the
Settings, see Volume Level,
page 14.
Left-hand screen icon control
This control adopts the same
functionality as the icon at the
bottom left-hand side of the
screen. The function will change
according to the system selected
and the active feature. Press the
control (3) to make your
selection.
Right-hand screen icon
control
This control adopts the same
functionality as the icon at the
bottom right-hand side of the
screen. The function will change
according to the system selected
and the active feature. Press the
control (4) to make your
selection.
To Next Page
Loading...