5. When IRIS is found,
‘McLaren MP4-12C’ will
appear on your phone
display.
6. Select this device from the
list.
7. IRIS will display a randomly
generated passcode.
8. Enter the passcode into your
phone when prompted. Once
the passcode is entered,
IRIS will automatically
connect to your phone.
9. Once your phone has been
paired and connected to
IRIS, it will connect
automatically whenever it
comes within range.
NOTE: If two or more
paired phones come
within range together, the
one Set as Primary will be
connected.
10. If it does not automatically
connect, you will have to
connect manually to IRIS,
using the cell phone controls.
NOTE: Some cell
phones always need to
be manually connected.
Some phones require the
connection to be authorized
each time. Set McLaren
MP4-12C as authorized in
the cell phone’s known
device list, to prevent this.
11. Check that your contacts and
call history can be accessed
through IRIS. To synchronize
the contacts manually, see
Sync Contacts, page 12.
To Next Page
Loading...