11. Data management
Use data management mode to view saved test results and transfer saved test results to USB drive or PC.
11.1 Creating a new asset ID
1. Turn rotary switch to select the data management position.
The primary field shows list of Assets stored on the MTR.
The secondary field shows the amount of entries, the total
storage available are shown in the left hand field and the
number of entries under the selected asset are shown in the
right hand field.
2. Press soft keys 2 and 3 to scroll up and down through the
asset list.
3. Press soft key 1 to type in a new asset. The relevant
language keyboard screen will appear.
Data management
58 www.megger.com
To Next Page
Loading...
