MELER GLUING SOLUTIONS TABLE OF CONTENTS
5. MAINTENANCE 5-1
External cleaning 5-1
System depressurisation 5-2
Cleaning the tank 5-3
Changing adhesive type 5-3
Cleaning burnt adhesive 5-3
Emptying the tank 5-4
Filter maintenance 5-5
Pump maintenance 5-6
Leakage inspection 5-6
Gear motor maintenance 5-6
Cleaning the motor fan 5-6
Checking the lubricant 5-6
Recommended lubricant 5-6
Safety Thermostat 5-7
Removing the equipment from its base 5-7
6. TECHNICAL CHARACTERISTICS 6-1
General 6-1
Dimensions 6-2
Melting unit 6-2
Base plate 6-2
Accessories 6-3
Level control system 6-3
Air drying system for PUR adhesives 6-3
Automatic tank filling system 6-3
7. ELECTRICAL DRAWINGS 7-1
To Next Page
Loading...
