MA-5082-ENG B4 VS ADHESIVE MELTER MANUALTABLE OF CONTENTS
Setting the clock 4-7
Setting the current day and time 4-7
Programming equipment activation/deactivation 4-8
Disabling the equipment activation/deactivation program 4-9
Programming the activation/deactivation of the equipment’s standby function 4-9
Disabling the equipment standby function program 4-10
Special function buttons 4-11
Pump start-up 4-12
Pumping control 4-12
Starting up the pump control card 4-12
Pumping safety measures 4-13
Password security 4-13
LED indicators 4-14
Modes of operation 4-15
Mode of operation with internal pumping control and internal speed control 4-15
Mode of operation with internal pumping control and external speed control 4-16
Mode of operation with external pumping control and internal speed control 4-17
Mode of operation with external pumping control and external speed control 4-18
User configuration menu 4-19
Displaying alarms and reset function 4-20
Maximum rpm alarm 4-20
Minimum rpm alarm 4-20
Variator alarm 4-21
Configuring speed ramp 4-21
Programming speed ramp 4-22
Current Vin voltage display 4-23
Regulating the bypass valve 4-23
Adjusting the manual valve 4-24
Pneumatic valve control 4-24
Turning off the melter 4-24
To Next Page
Loading...
