Lubricant, Sealant, Adhesives
Tube Ref No. Description Where Used Part No.
Extreme Grease Coupler splines 8M0071842
Loctite Silver Graphite Anti-
Seize Spray
Front mount studs 92-898101390
Battery connection sealant Battery terminal connections Obtain Locally
9
Loctite 567 PST Pipe
Sealant
After the first thread of the audio warning temperature switch 92-809822
19
Perfect Seal Engine mounting hardware threads and nuts 92-34227Q02
25
Liquid Neoprene
Battery terminals
All electrical connections
Exposed terminals and connections
92- 25711 3
80
SAE Engine Oil 30W Shift cable pivot points Obtain Locally
Special Tools
Alignment Tool Assembly
91‑805475A 1
Aligns the engine and the sterndrive unit during installation.
Shift Cable Adjustment Tool 91‑12427T
Attaches over the shift cable, and aids in proper shift cable adjustment at the
shift plate.
Dual Water Pick‑up Flush Seal Kit 91‑881150K 1
Blocks off the front water inlet holes on the dual water inlet gearcases.
Flushing Attachment 91‑44357Q 2
Attaches to the water intakes; provides a fresh water connection when flushing
the cooling system or operating the engine.
Installation
Page 2B-2 © 2016 Mercury Marine 90-8M0099748 eng DECEMBER 2015
To Next Page
Loading...
