Mercury MERCRUISER - 6.2 L Exhaust; Hose Clamp Identification; Tridon Hose Clamp

Hose Clamp Identification
IMPORTANT: Tridon types of hose clamps are used in various locations on Mercury MerCruiser power packages.
a -
Tridon
®
hose clamp
b - Hex head screw (5/16 in.)
c - Slot cut through the band
Tridon® Hose Clamp
The Tridon
®
hose clamp uses a worm screw with 5/16 in. hex head to engage slots cut through the band.
Description
Nm lb‑in. lb‑ft
Tridon
®
hose clamp
4–4.7 35.4–41.6 –
6.2L Exhaust
• Exhaust system installation specifications
• Sterndrive models 11 in. elbow height—Static waterline height. Switchable allowed, Quick and Quiet baffles required for
Corsa installation.
• Inboard and TowSport
• 13 in. elbow height—Static waterline height.
• Inboard exhaust systems requirement from Mercury. Mercury in‑line shutters shipped with engine.
• TowSport engine will ship with mufflers.
• Factory risers:
• 0" (not on inboard)
• 2" (except TowSport and inboard)
• 4" (except TowSport)
• 6" (except TowSport)
b
a
c
57208
Exhaust Pipe and Through-the-Propeller Exhaust
Page 7C-4 © 2016 Mercury Marine 90-8M0099748 eng DECEMBER 2015