Mercury MERCRUISER - Steering Pump Assembly Installation

c. Drain the fluid into a suitable container. Dispose of the fluid according to local regulations.
Power-assisted steering pump assembly
a - Return hose
b - High‑pressure hose
4. Remove the mounting screws from the power‑assisted steering pump and mounting brackets.
a - Pump mounting screws
5. Remove the power‑assisted steering pump from the mounting brackets.
Steering Pump Assembly Installation
IMPORTANT: Do not cross‑thread or overtighten the hose fittings.
1. Place the power‑assisted steering pump onto the mounting brackets. Tighten the bracket to the specified torque.
Description
Nm lb‑in. lb‑ft
Power steering bracket to the block 35.2 – 26
a
b
56918
56917
a
aa
Power-Assisted Steering Pump and Related Components
90-8M0099748 eng DECEMBER 2015 © 2016 Mercury Marine Page 8A-15