Mercury MERCRUISER - Page 260

5. Install the rocker arm assemblies in their original locations.
a - Contact surfaces
b - Threads
c - Pivot points
a - Rocker arm retaining
bolt
6. Align the crankshaft and camshaft alignment marks. Tighten the rocker arm bolts to the specified torque. Rotate the
crankshaft one full revolution and check all rocker bolts to the specified torque.
Description
Nm lb‑in. lb‑ft
Rocker arm bolts 30 – 22.1
55138
c
a
a
b
a
59507
Engine Inspection and Assembly
Page 3B-58 © 2016 Mercury Marine 90-8M0099748 eng DECEMBER 2015