METREL EurotestXE User Manual

MI 3102(H) BT EurotestXE Appendix D – Commanders
114
PE terminal test procedure
 Connect commander to the instrument.
 Connect commander to the item to be tested (see Figure D.4).
 Touch PE test probe (the TEST key) on commander for at least one second.
 If PE terminal is connected to phase voltage both LEDs will light yellow, the warning
message on the instrument is displayed, instrument’s buzzer is activated, and further
measurements are disabled in Zloop and RCD functions.
Figure D.4: Reversed L and PE conductors (application of plug commander)

METREL EurotestXE Specifications

General

Brand	METREL
Model	EurotestXE
Category	Measuring Instruments
Language	English