METREL EurotestXE User Manual

MI 3102(H) BT EurotestXE Instrument operation
23
4.2 Function selection
For selecting test / measurement function within each test mode the function selector keys
shall be used.
Keys:
Function selector
Selects test / measurement function.
UP / DOWN
Selects sub-function in selected measurement function.
TAB
Selects the test parameter to be set or modified.
TEST
Runs selected test / measurement function.
MEM
Stores measured results / recalls stored results.
ESC
Exits back to main menu.
Keys in test parameter field:
UP / DOWN
Changes the selected parameter.
TAB
Selects the next measuring parameter.
Function selector
Toggles between the main functions.
MEM
Stores measured results / recalls stored results
General rule regarding enabling parameters for evaluation of measurement / test result:
Parameter
OFF
No limit values, indication: _ _ _.
ON
Value(s) – results will be marked as PASS or FAIL in accordance
with selected limit.
See chapter 5 Measurements for more information about the operation of the instrument test
functions.

METREL EurotestXE Specifications

General

Brand	METREL
Model	EurotestXE
Category	Measuring Instruments
Language	English