METREL EurotestXE User Manual

MI 3102(H) BT EurotestXE Safety and operational considerations
13
2.3 Standards applied
The Eurotest instruments are manufactured and tested in accordance with the following
regulations:
Electromagnetic compatibility (EMC)
EN 61326
Electrical equipment for measurement, control and laboratory
use – EMC requirements
Class B (Hand-held equipment used in controlled EM environments)
Safety (LVD)
EN 61010-1
Safety requirements for electrical equipment for measurement, control and
laboratory use – Part 1: General requirements
EN 61010-2-030
Safety requirements for electrical equipment for measurement, control and
laboratory use – Part 2-030: Particular requirements for testing and
measuring circuits
EN 61010-031
Safety requirements for electrical equipment for measurement, control and
laboratory use – Part 031: Safety requirements for hand-held probe
assemblies for electrical measurement and test
EN 61010-2-032
Safety requirements for electrical equipment for measurement, control, and
laboratory use - Part 2-032: Particular requirements for hand-held and hand-
manipulated current sensors for electrical test and measurement
Functionality
EN 61557
Electrical safety in low voltage distribution systems up to 1000 V
AC
and 1500
V
AC
– Equipment for testing, measuring or monitoring of protective measures
Part 1: General requirements
Part 2: Insulation resistance
Part 3: Loop resistance
Part 4: Resistance of earth connection and equipotential bonding
Part 5: Resistance to earth
Part 6: Residual current devices (RCDs) in TT and TN systems
Part 7: Phase sequence
Part 10: Combined measuring equipment
Part 12: Performance measuring and monitoring devices (PMD)
DIN 5032
Photometry
Part 7: Classification of illuminance meters and luminance meters
Reference standards for electrical installations and components
EN 61008
Residual current operated circuit-breakers without integral overcurrent
protection for household and similar uses
EN 61009
Residual current operated circuit-breakers with integral overcurrent
protection for household and similar uses
IEC 60364-4-41
Electrical installations of buildings Part 4-41 Protection for safety –
protection against electric shock
BS 7671
IEE Wiring Regulations (17
th
edition)
AS/NZS 3017
Electrical installations – Verification guidelines
Note about EN and IEC standards:
 Text of this manual contains references to European standards. All standards of EN
6XXXX (e.g. EN 61010) series are equivalent to IEC standards with the same number
(e.g. IEC 61010) and differ only in amended parts required by European harmonization
procedure.

METREL EurotestXE Specifications

General

Brand	METREL
Model	EurotestXE
Category	Measuring Instruments
Language	English