METREL EurotestXE User Manual

MI 3102(H) BT EurotestXE Technical specifications
90
10.2 Diagnostic test (MI 3102H BT only)
Dielectric absorption ratio DAR*
Measuring range
Resolution
Accuracy
0.01  9.99
0.01
(5% of reading + 2digits)
10.0  100.0
0.1
(5% of reading)
* Only for test voltages 500 V
DC
, 1000 V
DC
and 2500V
DC
. If any insulation resistance values
(R
ISO
(15s) or R
ISO
(60s )) are over-ranged the DAR factor is not calculated. The result field is
blank: DAR:_____!
Polarization index PI**
Measuring range
Resolution
Accuracy
0.01  9.99
0.01
(5% of reading + 2digits)
10.0  100.0
0.1
(5% of reading)
** Only for test voltages 500 V
DC
, 1000 V
DC
and 2500V
DC
. If any insulation resistance values
(R
ISO
(60s) or R
ISO
(10min)) are over-ranged the PI factor is not calculated. The result field is
blank: PI :_____!
10.3 Continuity
10.3.1 Resistance R LOW
Measuring range according to EN 61557 is 0.16  1999 .
Measuring range R ()
Resolution ()
Accuracy
0.00  19.99
0.01
(3 % of reading + 3 digits)
20.0  199.9
0.1
(5 % of reading)
200  1999
1
Measuring range R+, R- ()
Resolution ()
Accuracy
0.0  199.9
0.1
(5 % of reading + 5 digits)
200  1999
1
Open-circuit voltage ................................ 6.5 VDC  9 VDC
Measuring current ................................... min. 200 mA into load resistance of 2 
Test lead compensation .......................... up to 5 
The number of possible tests .................. > 2000, with a fully charged battery
Automatic polarity reversal of the test voltage.
10.3.2 Resistance CONTINUITY
Measuring range ()
Resolution ()
Accuracy
0.0  19.9
0.1
(5 % of reading + 3 digits)
20  1999
1
Open-circuit voltage ................................ 6.5 VDC  9 VDC
Short-circuit current ................................ max. 8.5 mA
Test lead compensation .......................... up to 5 

METREL EurotestXE Specifications

General

Brand	METREL
Model	EurotestXE
Category	Measuring Instruments
Language	English