Page 109
Appendix | Smart Averaging
thermoMETER CT
A 5 Smart Averaging
The average function is generally used to smoothen the signal curves. With the adjustable parameter time this
function can be optimal adjusted to the respective application. One disadvantage of the average function is that
fast temperature peaks which are caused by dynamic events are subjected to the same averaging time. Therefore
those peaks can only be seen with a delay on the signal output.
The function Smart Averaging eliminates this disadvantage by passing those fast events without averaging directly
through to the signal output.
Fig. 57 Signal curve with Smart Averaging function Fig. 58 Signal curve without Smart Averaging function
To Next Page
Loading...
