MICRO-EPSILON thermoMETER CT Series User Manual

Page 72
Operating
thermoMETER CT
9.2 Sensor Setup
The programming keys , and enable the user to set the sensor on-site. The current measuring
value or the chosen feature is displayed. With
the operator obtains the chosen feature, with and
the functional parameters can be selected – a change of parameters will have immediate effect. If no key is
pressed for more than 10 seconds the display automatically shows the calculated object temperature (ac-
cording to the signal processing).
Mode Up Down
Display
Laser
on / off
Fig. 28 Display and programming keys
Pressing the
button again recalls the last called function on the display. The signal processing features
peak hold and valley hold cannot be selected simultaneously.

MICRO-EPSILON thermoMETER CT Series Specifications

General

Brand	MICRO-EPSILON
Model	thermoMETER CT Series
Category	Accessories
Language	English